Magnetic Tube Clasp "How to": Stateside Bead Supply

Magnetic Tube Clasp "How to attach with crimps"

The following example uses Soft Flex wire .019 gauge and a 6x6 magnetic tube clasp.
The beads are 8mm round magnetic hematite.

Tools required: crimping plier, micro cutters, chain nose plier (optional),
and silver plated crimps.

string 1 crimp onto the cord	pull the cord back through the crimp	pull each end to tighten
place the crimp into the inner circle of the crimping plier	squeeze the crimp.	this will fold it over
now place the folded crimp into outer circle of the crimping plier	squeeze again! this will roll the crimp into a circle	now clip off the excess cord with the micro cutters
pull the finished crimp into the large hole of the clasp	now string your beads	string the other half of the tube clasp (small hole first)
place another crimp on your cord	hold the crimp in the jaws of crimping plier and press against the clasp while pulling the cord and squeeze. repeat the steps like before to roll the crimp	cut off excess cord
done